Improve droop travel, drivability and tire wear with SPC's adjustable front upper control arms. Fit bigger tires without rubbing fenders. Featuring a greasable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles on standard height vehicles as well as lifted and lowered vehicles while maintaining factory ride quality. SPC's tube and plate arms are made in our facility in Colorado. Their proven design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.

- Get more droop travel: Don't let the OE ball joints or mono-ball articulation limit your travel. SPC joints are oversized and provide 80° of travel.

- Get your drivability and tracking back: Your truck may have started to 'wander' after you lifted it. That is because you lost caster. Install SPC arms and get your 'drivability' back by putting your alignment in specification.

- Improve tire clearance: Are your oversized tires rubbing the fenders or frame rails? SPC Adjustable Arms, in combination with the OE adjustments on the lower arm, allow you to dial in alignment spcs at the same time that you move the tire forward/outward in the wheel well by up to 1".

NOTE: For Rangers with aluminum knuckles ONLY

California Residents WARNING

Improve droop travel, drivability and tire wear with SPC's adjustable front upper arms for Rangers equipped with steel knuckles. Fit bigger tires without rubbing fenders. Featuring a greasable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles on standard height vehicles as well as lifted and lowered vehicles while maintaining factory ride quality. SPC's tube and plate arms are made in our facility in Colorado. Their proven design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.

Get more droop travel: Don't let OE ball joint or mono-ball articulation limit your travel. SPC joints are oversized and provide 80° of travel.
Get your drivability and tracking back: Your truck may have started to 'wander' after you lifted it. That is because you lost caster. Install SPC arms and get your 'drivability' back by putting your alignment back in specification.
Improve tire clearance: Are you oversized tires rubbing the fenders or the frame rails? SPC Adjustable Arms, in combination with the OE adjustments on the lower arm, allow you to dial in alignment specs at the same time that you move the tire forward/outward in the wheel well by up to 1".

NOTE: For Rangers with steel knuckles ONLY.

This sleeve set will change camber and/or caster from 1/8 degree to 1-1/2 degree in 1/4 degree increments. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve. Determine the change needed and replace the existing sleeve with the correct one. #4169 spanner socket required for sleeve removal. Set includes 6 sleeves.

California Residents WARNING

Make rear camber on the Mazda CX-5 adjustable for life with this adjustable lower control arm and extended range toe cam kit. The remove and replace camber arm provides ±3.0° of change and the included extended range toe cam will get toe back to specification through the entire camber range. Whether you need to adjust to improve handling or decrease tire wear issues, this is the kit for you. Use rotary file #85130 to extend the factory toe slot and take advantage of the full throw provided by the SPC's extended toe cam bolt. Also includes an optional bracket for use with '17 & newer models that include an air dam on the lower control arm.

California Residents WARNING

Replacement bushing kit for 25540 and 25485 upper arms.

California Residents WARNING

Add more adjustment to the rear suspension on your Ford Expedition with this fully adjustable camber control arm. This arm replaces the factory non-adjustable upper control arm and allows easy on-car adjustment to dial in the camber exactly where you want it. The bonded rubber bushing retains factory ride and vibration quality while providing a long service life.

These truck sleeves will correct caster and camber on trucks equipped with the Dana Super 60 solid axle, like the F450, F550 and GM Toptick. This set includes one each of 9 different sleeves ranging from 0 to 2° offset. Have the sleeve you need on hte shelf and ready to be used when you need it. Individual sleeves are also available. See part numbers 23231 through 23239.

California Residents WARNING

Double the change provided by the OE toe cam with this replacement cam from SPC. Use this kit to take advantage of a full ±2° adjustment or simple replace corroded and damaged toe cams on teh Acura RDX. Depending on how much change you need, you may need to use rotary file #85130 to extend factory toe slot and take full advantage of the extended range on this cam bolt. Kit is sold per side, one cam bolt per kit.

California Residents WARNING

The Cam Bolt Kit is a replacement for the OE adjusters. The OE bolts on Toyota trucks and SUVs are frequently "frozen" and do not allow for adjustment. Remove the bolt assembly and replace it with an SPC cam kit to get up to ±1.50° camber and caster change. OE adjuster assemblies that are severely corroded may require SPC's press tool 40915 for removal, making the job quick and easy.

California Residents WARNING

Quickly and easily adjust rear camber with this cam and bracket kit designed for the Ford Expedition. Simply replace the OE lock plate and dial camber in exactly where you need it. This kit features a 700 hr salt spray tested coating for corrosion resistance and long service life. Kit is sold per side, you will need two if you are adjusting both sides. Need to add more camber adjustment? Consider our adjustable rear camber arm, SPC PN 67275.

California Residents WARNING

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 2 degree taper. Six shims per box.

California Residents WARNING

Use this sliding balljoint to adjust camber on the rear of the Acura MDX for improved handling and tire wear. The OE quality balljoint is easily installed and corrects camber angles ±3°.

California Residents WARNING