|◀ 1 - 12 of 277 ▶|
View:
FLARED HOLE DIE
Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared holes are found in many aircraft and race vehicles designs. Beginning with comprehensive finite element analysis supported by extensive prototype testing, our Flared Hole Dies are engineered to provide the optimum combination of performance attributes: *Designed to eliminate edge tearing even when used on high strength 4130 chromoly sheet (normalized condition), with laser cut holes (hardened edges) *Optimized form (flare angle, bend radius and length of run) provides maximum stiffness and strength *Manufactured from premium hardened high carbon steel for maximum tool life *Unique shape for ease of handling *Up to max sheet thickness of .090 for chromoly and .125 for mild steel.

California Residents WARNING
Item#:
15840
Manufacturer Item:
China
Your Price:
67.86
Each Single
These Torque Stix are low cost and efficient. There is nothing to calibrate or mantain and the end result is properly torqued wheels and satisfied customers who demand properly torqued lug nuts. Vehicle torque specification chart #70050 included with set. Set includes: #76610 - green, 71mm nut, 55 ft. lbs. torque - #76615 - red, 17mm nut, 80 ft. lbs. torque - #76620 - yellow , 19mm nut (3/4"), 65 ft. lbs. torque - #76625 - blue, 19mm nut (3/4"), 80 ft. lbs. torque - #76630 - grey, 19mm nut (3/4"), 100 ft. lbs. torque, #76635 - brown, 13/16" nut, 100 ft. lbs. torque - #76640 - black, 21mm nut, 60 ft. lbs. torque - #76645 - orange, 21mm nut, 80 ft. lbs. torque - #76650 - white, 7/8" nut, 120 ft. lbs. torque - #76655 - aqua, 7/8" nut, 140 ft. lbs. torque.

California Residents WARNING
Item#:
76900
Manufacturer Item:
China
Your Price:
486.00
Set of Parts
These wrenches makes presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned over the slot opening of the sleeve body.

California Residents WARNING
Item#:
74400
Manufacturer Item:
USA
Your Price:
38.05
Each Single
This 1-1/2" socket is useful for adjusting both the OEM and our popular 23130 & 23180 sleeve series for Ford and Mazda 2 & 4WD trucks with pinch bolt style suspension. FOR 1/2" DRIVES.

California Residents WARNING
Item#:
87175
Your Price:
47.45
Each Single
These wrenches make presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer.

California Residents WARNING
Item#:
74500
Manufacturer Item:
USA
Your Price:
38.05
Each Single
FOR 40910 SET
1/8" THICK TUBE FOR 40910

California Residents WARNING
Item#:
4429
Manufacturer Item:
Taiwan
Your Price:
11.34
Each Single
This tool is used to cut holes necessary to install our part number 83115 camber kits. A must to ensure a good, round hole. CAUTION: NOT FOR USE WITH IMPACT WRENCHES (AIR TOOLS).

California Residents WARNING
Item#:
73010
Manufacturer Item:
USA
Your Price:
180.20
Each Single
Pointer for 99511/99515/99517
11" Replacement service pointer for 99511 & 99515 & 99517

California Residents WARNING
Item#:
WA5119
Manufacturer Item:
USA
Your Price:
19.33
Each Single
CUTS UP TO 10 GA MILD STEEL
Turn any 1/2" [12mm] hole into a precise and clean 14mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" [38mm]. Use this tool to quickly and cleanly slot subframe or control arm bracket holes allowing adjustment unavailable from the factory.

California Residents WARNING
Item#:
74930
Your Price:
339.61
Each Single
CUTS UP TO 10 GA MILD STEEL
Turn any 1/2" [12mm] hole into a precise and clean 8mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" [38mm]. Use this tool to quickly and cleanly slot subframe or control arm bracket holes allowing adjustment unavailable from the factory.

California Residents WARNING
Item#:
74940
Your Price:
339.61
Each Single
CUTS UP TO 10 GA MILD STEEL
Turn any 9/16" [14 mm] hole into a precise and clean 16mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" [38mm]. Use this tool to quickly and cleanly slot subframe or control arm bracket holes allowing adjustment where the factory didn't provide any options.

California Residents WARNING
Item#:
74920
Your Price:
339.61
Each Single
FLARED HOLE DIE
Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared holes are found in many aircraft and race vehicles designs. Beginning with comprehensive finite element analysis supported by extensive prototype testing, our Flared Hole Dies are engineered to provide the optimum combination of performance attributes: *Designed to eliminate edge tearing even when used on high strength 4130 chromoly sheet (normalized condition), with laser cut holes (hardened edges) *Optimized form (flare angle, bend radius and length of run) provides maximum stiffness and strength *Manufactured from premium hardened high carbon steel for maximum tool life *Unique shape for ease of handling *Up to max sheet thickness of .090 for chromoly and .125 for mild steel.

California Residents WARNING
Item#:
15850
Manufacturer Item:
China
Your Price:
108.64
Each Single
|◀ 1 - 12 of 277 ▶|
View: