These heavy duty bolts and brackets replace the upper control arm mounting bolts giving you both camber and caster adjustment. Kit includes 2 cam and bolt sets to cover one side of the vehicle.

California Residents WARNING

These heavy duty bolts and brackets replace the upper control arm mounting bolts giving you both camber and caster adjustment. Kit includes 2 cam and bolt sets to cover one side of the vehicle.

California Residents WARNING

These direct-fit, stock-length front lower control arms add strength, and articulation flexibility for your stock-height or 'lifted' suspension Wrangler. They feature SPC's xAxis sealed flex joints to provide bind-free 'twist' between the frame and axle during off-road articulation. The main tube is 3/16" wall round DOM steel to provide strength and a knobby-tread-friendly shape to handle large tires, low gearing, and big horsepower.

California Residents WARNING

These direct-fit front upper control arms add strength, on-car adjustability and articulation flexibility to your stock-height or 'lifted' suspension Wrangler. They feature SPC's xAxis sealed flex joints mounted in forged rings at the frame ends to provide bind-free 'twist' between the frame and axle during off-road articulation. The dual-threaded adjuster and jam nuts make caster/pinion angle adjustments quick and easy without the need to disconnect the arms or mess with cams and slotted hole knock-outs. Main tube is 3/16" wall DOM steel for 'overkill' strength to handle large tires, low gearing, and big horsepower.

California Residents WARNING

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.

California Residents WARNING

Correct front caster and camber on medium duty Ford trucks with this complete truck sleeve assortment set. This set includes 9 sleeves ranging from 0 to 2° of offset. Have the sleeve you need on the shelf and ready to be used when you need it. Individual sleeves are also available. See part numbers 23221 through 23229.

California Residents WARNING

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.

California Residents WARNING

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the amount of change needed.

California Residents WARNING

Replace coroded or damaged factory front camber and caster bolts on the Dodge Ram 1500 with these hex chromate free 700 salt spray tested cam bolts from SPC. This kit is sold per wheel and gives you the same adjustment range as the factory cam, ±2° for camber and caster. This pair of cam bolts is enough to replace the bolts on one lower control arm. If you need more change than the OE cams give you, use SPC's adjustable upper ball joint p/n 23940.

California Residents WARNING

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 3 degree taper. Six shims per box.

California Residents WARNING

This Cam Bolt Kit is a replacement for the OE adjusters. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ±1.5 degrees camber and caster change.

California Residents WARNING

This Cam Bolt Kit is a replacement for the OE adjusters. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ±1.5 degrees camber and caster change. OE adjuster assemblies that are corroded may require SPC's press tool 40915 for removal, making the job quick and easy.

California Residents WARNING