0 Items
Home  >  Parts  >  Offroad Fabrication  >  Spherical Bearings & Receivers
|◀ ◀ 1 - 9 of 9 ▶ ▶|
View:
BEARING RECEIVER
Bearing Dia 1.0000",Bearing Race Width 0.5050", Receiver OD 1.250",Receiver Height 0.71" Bearing Offset 0.0125".

California Residents WARNING
Item#:
15060
Country of Origin:
USA
Your Price:
27.53
Each Single
BEARING RECEIVER
Bearing Dia 1.1875",Bearing Race Width 0.5670", Receiver OD 1.483",Receiver Height 0.84" Bearing Offset 0.0265".

California Residents WARNING
Item#:
15055
Country of Origin:
USA
Your Price:
31.95
Each Single
BEARING RECEIVER
Bearing Dia 0.8125",Bearing Race Width 0.4060", Receiver OD 1.063",Receiver Height 0.58" Bearing Offset 0.0170".

California Residents WARNING
Item#:
15065
Country of Origin:
USA
Your Price:
30.45
Each Single
WELD-IN RING
Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for easy snap ring removal. For xAxis with a 1.75" OD. Refer to www.specprod.com/builderseries for sealed flex joints that will work with this end ring and suggested press adaptor.

California Residents WARNING
Item#:
15521
Country of Origin:
China
Your Price:
17.66
Each Single
WELD-IN RING
Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for easy snap ring removal. For xAxis with a 1.8125" OD. Refer to www.specprod.com/builderseries for sealed flex joints that will work with this end ring and suggested press adaptor.

California Residents WARNING
Item#:
15524
Country of Origin:
China
Your Price:
17.66
Each Single
WELD-IN RING
Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for easy snap ring removal. For xAxis with a 2.0" OD. Refer to www.specprod.com/builderseries for sealed flex joints that will work with this end ring and suggested press adaptor.

California Residents WARNING
Item#:
15522
Country of Origin:
China
Your Price:
19.34
Each Single
WELD-IN RING
Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for easy snap ring removal. For xAxis with a 40mm OD. Refer to www.specprod.com/builderseries for sealed flex joints that will work with this end ring and suggested press adaptor.

California Residents WARNING
Item#:
15526
Country of Origin:
China
Your Price:
16.78
Each Single
12mm X 48mm X 40mm
The xAxis Sealed Flex Join is a technology step-up for suspension joints and linkages. xAxis delivers reduced compliance vs rubber, improved durability vs spherical bearings, and increased angularity vs urethane. Featuring sealed ends to keep grease in and contaminants out, a highly polished ball, and 19° of articulation, this cross axis ball joint will meet the most demanding requirements.

California Residents WARNING
Item#:
15624
Country of Origin:
China
Your Price:
48.95
Each Single
10mm X 40mm X 1.750"
The SPC xAxis Sealed Fle Joint reduces compliance, increases angularity, and improves durability vs rubber bushings and other aftermarket options. This variant of the xAxis has an aluminum outer shell making it a material fit for any aluminum control arm application. Built to accept a 10mm bolt and go into a 40mm bracket,the joint will push into a 1.750" end ring. The xAxis joint is built to upgrade the bushings on SPC Audi arms, but can be used in the custom build of your choice.

California Residents WARNING
Item#:
15625
Country of Origin:
China
Your Price:
55.70
Each Single
|◀ ◀ 1 - 9 of 9 ▶ ▶|
View: