0 Items
Home  >  Tools
|◀ ◀ 157 - 168 of 204 ▶ ▶|
View:
30mm WITH 5 mm PINS
This tool is a must when servicing rebuildable ball joints from SPC. The 30mm spanner wrench has 5mm pins and is specifically designed for SPC's p/n 72610 Porsche arms and Builder Series of ball joints. The steel spanner features a 3/8" square drive to make removing the ball joint cap fast and easy. Use this tool in conjunction with a torque wrench to set ball joint preload and stud turning torque to where you want it or on any other project that needs this size spanner.

California Residents WARNING
Item#:
72120
Country of Origin:
USA
Your Price:
29.03
Each Single
SPOT WELD CUTTER
Air drill driven tool made to cut out the spot welds holding the original equipment alignment plate to the top of strut towers. Once the plate is loosened caster and camber can be adjusted. Sold with 3/8" and 5/16" removable cutters. Use our "Cool Tool" cutting fluid #85774, for longer cutter life CAUTION: Always wear safety glasses when using cutting or grinding tools and equipment.

California Residents WARNING
Item#:
68670
Country of Origin:
Taiwan, Province Of
Your Price:
47.20
Each Single
FOR COIL SPRINGS
A handy chromoly steel compressor designed to fit inside most coil springs with an internally mounted shock. Will accomodate spring lengths from 8-1/4" to 14". It can be used on any coil spring with a minimum inside diameter of 3-3/8" to a maximum inside diameter of 5-5/8" and wire diameters up to 3/4". NOTE: NOT for use on MacPherson struts or Fiat vehicles.

California Residents WARNING
Item#:
40250
Country of Origin:
Taiwan, Province Of
Your Price:
92.91
Each Single
KNUCKLE TOOL
Stop damaging steering knuckles by removing linkages or struts with pry bars, screwdrivers and hammers. Use the Steering Knuckle Spreader Tool to make quick work of tight and corroded steering knuckles by simply turning the threaded wedge assembly. This is a must for any technicain performing suspension work, especially for those who see the Ford Taurus or BMW passenger cars. Blow molded case included.

California Residents WARNING
Item#:
37980
Country of Origin:
Taiwan, Province Of
Your Price:
96.06
Each Single
WHEEL HOLDER
A must for proper alignments. This tool securely holds the steering wheel and it's covered hooks & base prevent damage to the steering wheel and seat.----------------------------- CAUTION: This product is not a locking device. Use only according to directions packaged with product.

California Residents WARNING
Item#:
77938
Country of Origin:
China
Your Price:
99.55
Each Single
FOR 4434 C-FRAME
This sleeve extracting rod fits into our 4434 C-Frame. The machined rod enables extraction of Toyota truck OE control arm cam sleeves that are often difficult to remove. The 44339 forcing rod can be used in your existing Specialty Products 40910 or 40920 bushing press. This rod comes in the 40915 kit.

California Residents WARNING
Item#:
44339
Country of Origin:
USA
Your Price:
60.98
Each Single
FOR 40910
THREADED FORCING ROD FOR 40910

California Residents WARNING
Item#:
4433
Country of Origin:
Taiwan, Province Of
Your Price:
39.78
Each Single
FOR 72509 TOOL
THREADED FORCING ROD FOR 72509

California Residents WARNING
Item#:
4438
Country of Origin:
Taiwan, Province Of
Your Price:
77.48
Each Single
REPLACEMENT PART
Threaded forcing rod for item #498

California Residents WARNING
Item#:
498-2
Country of Origin:
Taiwan, Province Of
Your Price:
14.78
Each Single
MOST PASSENGER CARS
Four position feature and 360° rotation lets you grip the sleeve properly, even with limited access. Fits most passenger cars & light trucks.

California Residents WARNING
Item#:
7023
Country of Origin:
Taiwan, Province Of
Your Price:
44.00
Each Single
14mm to 16mm
Adjust inner tie rods with this easy to use, time-saving tool. This wrench features spring loaded, toothed jaws and a comfortable gripping handle to make toe adjustments quick and painless. This tool fits 14 to 16mm tie rods. Other sizes are also available: SPC p/n 40850 fits 10.5-12mm rods, p/n 40860 fits 12-14mm rods, and p/n 40880 fits 17-19mm rods. Also consider purchasing the complete 4 piece set with SPC p/n 40840.

California Residents WARNING
Item#:
40870
Country of Origin:
China
Your Price:
107.75
Each Single
17mm to 19mm
Adjust inner tie rods with this easy to use, time-saving tool. This wrench features spring loaded, toothed jaws and a comfortable gripping handle to make toe adjustments quick and painless. This tool fits 16 to 19mm tie rods. Other sizes are also available: SPC p/n 40850 fits 10.5-12mm rods, p/n 40860 fits 12-14mm rods, and p/n 40870 fits 14-16mm rods. Also consider purchasing the complete 4 piece set with SPC p/n 40840.

California Residents WARNING
Item#:
40880
Country of Origin:
China
Your Price:
107.75
Each Single
|◀ ◀ 157 - 168 of 204 ▶ ▶|
View: