Kit contains 1 bolt, 2 cams, and 1 nut to replace the hardware from a 67660 control arm.

California Residents WARNING

Replacement nut for adustable ball joints.

California Residents WARNING

This full contact shim corrects the camber angle on both AWD and FWD Toyota Siennas. The 71631 provides plus or minus 0.25° of camber change. The shim series can be stacked (up to 2) for additional camber change or to correct toe at the same time. Other shims in the series are 71621 for ±0.1° toe, 71622 for ±.2° toe, 71623 for ±.3° toe, 71624 for ±.4° toe, 71625 for ±.5° toe, and 71632 for ±.50° camber.

California Residents WARNING

This full contact shim corrects the camber angle on both AWD and FWD Toyota Siennas. The 71632 provides plus or minus 0.5° of camber change. The shim series can be stacked (up to 2) for additional camber change or to correct toe at the same time. Other shims in the series are 71621 for ±.1° toe, 71622 for ±.2° toe, 71623 for ±.3° toe, 71624 for ±.4° toe, 71625 for ±.5° toe, and 71631 for ±.25° camber.

California Residents WARNING

This full contact rear series of 14 shims includes 2 toe shims each (± .10°, ±.20°, ±.30°, ±.40°, ± .50°) and 2 camber shims each (± .25° to ± .50°) for both FWD and AWD Toyota Siennas. Combination adjustments or changes up to 1° may be made by stacking up to 2 shims per side.

California Residents WARNING

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over 1 degree Includes 12 shims / 2 each of item numbers 71020, 71021,71022,71023,71024,71025.

California Residents WARNING

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71622 provides plus or minus 0.2° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims in the series are 71621 for ±.1° toe, 71623 for ±.3° toe, 71624 for ±.4° toe, 71625 for ±.5° toe, 71631 for ±.25° camber, and 71632 for ±.50° camber.

California Residents WARNING

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71623 provides plus or minus 0.3° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims in the series are 71621 for ±.1° toe, 71622 for ±.2° toe, 71624 for ±.4° toe, 71625 for ±.5°, 71631 for ±.25° camber, and 71632 for ±.50° camber.

California Residents WARNING

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71624 provides plus or minus 0.4° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims in the series are 71621 for ±.1° toe, 7162 2 for ±.2°toe, 71623 for ±.3° toe, 71625 for ±.5° toe, 71631 for ±.25° camber, and 71632 for ±.50° camber.

California Residents WARNING

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71625 provides plus or minus 0.5° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims in the series are 71621 for ±.1° toe, 71622 for ±.2° toe, 71623 for ±.3° toe, 71624 for ±.4° toe, 71631 for ±.25° camber, and 71632 for ±.50° camber.

California Residents WARNING

This full contact shim corrects the toe angle on both AWD and FWD Toyota Siennas. The 71621 provides plus or minus 0.1° of toe change. The shim series can be stacked (up to 2) for additional toe change or to correct camber at the same time. Other shims in the series are 71622 for ±.2° toe, 71623 for ±.3° toe, 71624 for ±.4° toe, 71625 for ±.5° toe, 71631 for ±.25° camber, and 71632 for ±.50° camber.

California Residents WARNING

Replacement bushings for 81350/81360 Audi arms.

California Residents WARNING