|◀ 1201 - 1212 of 1221 ▶|
View:
These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING
Item#:
94348
Country of Origin:
USA
Your Price:
57.53
Pair (2)
Welds into stock tubing sizes.Thread Size 5/8"-18 Outside Dia..870".Thread Length 1.3",Overall Length 1.938" Nominal Tube Size 1.000" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING
Item#:
15110
Country of Origin:
China
Your Price:
124.53
Each Single
70-81 CHEVY CAMARO
Includes a flat midsize plate, adjustable sleeves, OE style (minimal deflection) pivots.

California Residents WARNING
Item#:
94340
Country of Origin:
USA
Your Price:
448.78
Each Single
64-72 CHEVY CHEVELLE
These arms lower your front end by 1" and add 1 degree positive caster for a ready-to-run aggressive stance. Optional Ride Height Tuning Kits are available for use with our Pro Series Springs or 'standard type' springs to raise the ride height if desired. If you have coilovers use our Coilover Mount and Spacer Plate. Shown with optional OEM style bump stop (#95339).

California Residents WARNING
Item#:
94344
Country of Origin:
USA
Your Price:
1948.05
Pair (2)
Welds into stock tubing sizes.Thread Size 3/4"-16 Outside Dia.1.120".Thread Length 1.4",Overall Length 2.125" Nominal Tube Size 1.250" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING
Item#:
15100
Country of Origin:
China
Your Price:
123.55
Each Single
64-72 CHEVY CHEVELLE
Includes a flat midsize plate, adjustable sleeves, OE style (minimal deflection) pivots.

California Residents WARNING
Item#:
94320
Country of Origin:
USA
Your Price:
461.61
Each Single
Adjustable Upper Control Arm with 5" steel cross shaft, 3-3/4" adjusting sleeves and a 10° Chrylser screw in ball joint plate. Sleeves adjust from 7" to 9".

California Residents WARNING
Item#:
92142
Country of Origin:
USA
Your Price:
435.78
Each Single
1/2" OD TO 3/8" ID
Insert ID 0.375",Shoulder OD 0.500",Shoulder length 0.300" Part Length 0.730",Stack Length 1.50" Mis-Align.Angle 21Deg

California Residents WARNING
Item#:
15032
Country of Origin:
USA
Your Price:
56.91
Pair (2)
Thread Size 1 1/4"-12 Outside Dia. 1.870" Thread Length 1.7" Overall Length 2.563" Nominal Tube Size 2.000" OD Recommended Tube Wall Thickness 0.065"

California Residents WARNING
Item#:
15085
Country of Origin:
China
Your Price:
0.00
Each Single
Contact us to order
Thread Size 1 1/4" Outside Dia 1.760" Thread Length 1.7" Overall Length 2.563" Nominal Tube Size 2.00" OD Recommended Tube Wall Thickness 0.120" We Recommend that .120 receivers not be turned down.

California Residents WARNING
Item#:
15087
Country of Origin:
China
Your Price:
170.53
Each Single
Thread Size 1 1/4" Outside Dia 1.760" Thread Length 1.7" Overall Length 2.563" Nominal Tube Size 2.00" OD Recommended Tube Wall Thickness 0.120" We Recommend that .120 receivers not be turned down.

California Residents WARNING
Item#:
15082
Country of Origin:
China
Your Price:
154.28
Each Single
Bearing Dia 0.8125",Bearing Race Width 0.4060", Receiver OD 1.063",Receiver Height 0.58" Bearing Offset 0.0170".

California Residents WARNING
Item#:
15065
Country of Origin:
USA
Your Price:
30.45
Each Single
|◀ 1201 - 1212 of 1221 ▶|
View: