Adjust rear camber on late model RAV4 and Lexus NX200t with this adjustable rear camber arm. With ±3.0° of adjustment, this arm will get your vehicle back into factory specification to ensure proper tire wear, handling, and ride quality. Use part number 67810 for the right hand side or part number 67811 for the left hand side of the rear suspension.

California Residents WARNING

Replace your OE rear camber or toe adjuster with this replacement cam bolt. OE cam bolts are frequently seized and can't be adjusted. Remove the corroded bolt assembly and replace it with SPC's cam bolt to restore the factory ±1.5° camber or toe change. This bolt kit features a plastic sleeve to eliminate future corrosion.

California Residents WARNING

This hi-strength adjustable lower rear camber arm provides ±2.0° of change for the popular BRZ, FR-S, WRX, and Impreza. Get the ultimate in performance and handling with this stamped arm featuring our new xAxis Sealed Joint which performs like a pillow joint but lasts like an OE joint. This kit is easy to adjust with a cam located at the outboard side of the arm. SPC's control arm is the only kit on the market to include an offset toe bushing to increase the range of your factory toe cam. In you need more toe consider SPC's toe arm #67655.

California Residents WARNING

Make rear camber adjustable on many late model Toyota with this camber arm from SPC. The forged steel design features easy on car adjustability and an OE styel bonded rubber bushing to maintain factory ride quality. Sold each, order two arms to make the rear fully adjustable. Rear toe cams frozen? Add SPC# 25370 replacement toe cams to restore adjustability and dial in the proper alignment.

California Residents WARNING

This bolt and bracket set allows for greater rear camber change on 1995 and up Sebrings, Avengers, Talons and Eclipses. One kit covers one side of the vehicle.

California Residents WARNING

This kit provides camber change up to ±2-1/2° on each rear wheel of Ford Taurus and Mercury Sable station wagons only. After replacing the inner lower control arm bolt and elongating the hole, install the 87350 cam bolt and rotate the head to adjust camber.

California Residents WARNING

Restore lost adjustment on Nissan Rogue and Juke models with this OE replacement rear camber bolt kit from SPC. Sold per wheel, order 2 kits to service both sides of the vehicle.

California Residents WARNING

This cam bolt and bracket kit provides an additional one degree of positive camber change. You will need to elongate the existing camber slot by using 85130 rotary files or equivalent. This is ideal for use on lowered vehicles along with our 67525 adjustable ball joint for front camber change.

California Residents WARNING

This cam bolt and bracket kit provides an additional one degree of positive camber change. You will need to elongate the existing camber slot by using 85130 rotary files or equivalent. This is ideal for use on lowered vehicles along with our 67525 adjustable ball joint for front camber change.

California Residents WARNING

Double the range of rear camber and toe adjustment on the popular Camaro to increase handling performacne and minimize tire wear. Remove and replace the OE cam bolts with our 87430 kit for ± 1.0° camber change and ± 2.0° toe change. No slotting or grinding needed!

California Residents WARNING

These cams (set of 2) replace the OE camber and toe adjustment cams and provide additional camber & toe changes. Adjustment slots will need to be elongated using 85130 rotary files or equivalent.

California Residents WARNING

Adjust rear camber and toe up to ±1.5° on 2012 through 2019 Nissan Versa. Kit includes extended length hub bolts for everything needed to do the job right. Improve tire wear, gas mileage, and handling by getting the alignment into specification.

California Residents WARNING