With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.

California Residents WARNING

These arms correct rear camber on stock ride height vehicles and vehicles that have been lowered up to 1.5" with an adjustment range of -2.0° to +3.5°. 67065 comes with a non-directional ball joint preinstalled. (Extreme drops-use #67265)

California Residents WARNING

Now you can adjust the front camber and caster on the Ford Focus with this upper strut plate. To install, remove the strut assembly, compress the spring and replace the O.E. upper bearing plate with the 81320. SPC uses a hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

California Residents WARNING

Adjust camber in the rear of many popular VW and Audi models ±3° with this fully adjustable rear camber arm from SPC. The forged steel arm and double threaded adjuster offer the strength and on-car adjustment needed for the track or simply getting tires back to factory specifications. SPC's arm uses bonded rubber bushings to maintain factory noise, vibration, and harshness (NVH) values. Use the included bracket to properly secure the factory ABS wire. The arm is sold each and can be used for either the right or left hand side. Be sure to order two kits if you need adjustment on both sides.

California Residents WARNING

By installing these cam bolts in the LOWER BOLT POSITION on the 2 bolt front strut assembly of this populer platform, you can dial in front camber adjustments. US Patent Nos. 8,544,861 * 8,469,375 * D783,393 * Additional Patents Pending China Patent No. ZL 201630012294.X

California Residents WARNING

This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides ±1.25°. This factory change is not enough change for lowered applications. By increasing the length of the rear upper control arm SPC Performance adds 2° positive camber to the rear suspension that can then be dialed in with the OEM cam bolt.

California Residents WARNING

Get your 8th and 9th generation Civic or Acura CSX & ILX track ready with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weighs less than the OE arm it will replace. The arm is built with SPC's xAxis sealed flex joint to reduce compliance. Its' unique adjustment design permits on car adjustment of ±3° camber. Whether you need negative camber and reduced compliance for the track or want to get back to OE specifications after lowering, this is the arm for you.

California Residents WARNING

Get your 10th generation Civic ready for the track with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weights less than the OE arm it will replace. The arm is built with SPC's xAxis sealed flex joint to reduce compliance. Its unique adjustment design permits on-car adjustment of ±3.0° camber. Whether you need negative camber and reduced compliance for the track or want to get back to OE specifications this is the arm for you.

California Residents WARNING

This kit replaces the outer bolt of the upper rear control arm and provides plus or minus 1° of camber adjustment. Perfect for lowered vehicles or standard alignments. US Patent Nos. 8,544,861 * 8,469,375 * D783,393 * Additional Patents Pending China Patent No. ZL 201630012294.X

California Residents WARNING

This rear bracket and bushing replaces the stock mount on'06 and up Honda Civics. By rotating the eccentric bolt/cam assembly in the bracket you can get +/-1.25 degrees of rear camber change. Use #75980 bushing removal press sleeve set with the #72509 ball joint press to remove the old bushing and to press in the new bushing.

California Residents WARNING