Lower Ball Joint. These work in our Hot Rod Mustang II Lower Cotnrol Arms. Equivalent to Moog #K772. To make removal easier use our #68880 Chrysler Ball Joint Socket.

California Residents WARNING

These extreme lower control arms are for Honda Civics and Acura Integras and RSXs. Made from aircraft aluminum alloy, these arms are available in a silver finish. When teamed up with front and rear camber arms SPC Performance provides you with a complete alignment solution when lowering your Civic, Del Sol, RSX, or Integra. -------------------------NOTE: These arms are for appearance and weight saving only. They include a special Socket, Part 69330 which is required for installation.

California Residents WARNING

SPC Performance offers whole car Performance Kits for solving camber problems when lowering some of today's most popular vehicles. These kits allow you to tune front and rear suspension angles as well as correct some wheel clearance problems from sport (1.5") to extreme (up to 3") drops. This Performance Kit fits Honda Civic 96-00. Kit includes 2-Adjustable Front Upper Control Arms and 2-Rear Adjustable EZ Arms. Allows for up to 3" of drop. NOTE: When lowering vehicles more than 1.5" other suspension modifications may be necessary.

California Residents WARNING

For popular Honda Civics and Acura Integras. These arms are for vehicles that retain the stock ride height or have been lowered for performance. Simply replace the OE arm with the EZ Arm XR, and you adjust the rear camber from -2.0° to +5.0°. Note: Some vehicles may need longer bolts when installing this arm. Use set #73415.

California Residents WARNING

This rear bracket and bushing replaces the stock mount on'06 and up Honda Civics. By rotating the eccentric bolt/cam assembly in the bracket you can get +/-1.25 degrees of rear camber change. Use #75980 bushing removal press sleeve set with the #72509 ball joint press to remove the old bushing and to press in the new bushing.

California Residents WARNING

Get your 10th generation Civic ready for the track with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weights less than the OE arm it will replace. The arm is built with SPC's xAxis sealed flex joint to reduce compliance. Its unique adjustment design permits on-car adjustment of ±3.0° camber. Whether you need negative camber and reduced compliance for the track or want to get back to OE specifications this is the arm for you.

California Residents WARNING

This EZ Arm corrects rear camber on Honda's redesigned 2001 - 2005 Civic along with the 2002 - 07 Acura RSX. Simply replace the O.E. arm with this arm, perfect for stock height and lowered vehicles.

California Residents WARNING

Replace worn rear knuckle cross axis ball joints on the IRS Mustang Cobra with xAxis joints from SPC Performance. SPC's cross axis ball joints feature highly polished electroless nickel plated balls, corrosion and wear resistant moly impregnated nylon races, and dust boots to keep contaminants out & ensure long life. xAxis Joints come pre-greased and are designed to be maintenance free. This kit includes four (4) xAxis joints and press tool adapters to service a complete rear end. Use press tool #40940 or similar. Just need to replace one bushing? Order SPC part number 15645.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING