Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for easy snap ring removal. For xAxis with a 40mm OD. Refer to www.specprod.com/builderseries for sealed flex joints that will work with this end ring and suggested press adaptor.

California Residents WARNING

Welds into stock tubing sizes.Thread Size 5/8"-18 Outside Dia..870".Thread Length 1.3",Overall Length 1.938" Nominal Tube Size 1.000" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

Welds into stock tubing sizes.Thread Size 1/2"-20 Outside Dia..745".Thread Length 1.2",Overall Length 1.813" Nominal Tube Size .875" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

Welds into stock tubing sizes.Thread Size 1/2"-20 Outside Dia..745".Thread Length 1.2",Overall Length 1.813" Nominal Tube Size .875" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

Includes a flat midsize plate, adjsutable sleeves, OE style (minimal deflection) pivots.

California Residents WARNING

Welds into stock tubing sizes.Thread Size 3/4"-16 Outside Dia.1.120".Thread Length 1.4",Overall Length 2.125" Nominal Tube Size 1.250" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

Welds into stock tubing sizes.Thread Size 5/8"-18 Outside Dia..870".Thread Length 1.3",Overall Length 1.938" Nominal Tube Size 1.000" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

These arms lower your front end by 1" and add 1 degree positive caster for a ready-to-run aggressive stance. Optional Ride Height Tuning Kits are available for use with our Pro Series Springs or 'standard type' springs to raise the ride height if desired. If you have coilovers use our Coilover Mount and Spacer Plate. Shown with optional OEM style bump stop (#95339).

California Residents WARNING

Welds into stock tubing sizes.Thread Size 3/4"-16 Outside Dia.1.120".Thread Length 1.4",Overall Length 2.125" Nominal Tube Size 1.250" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

Adjustable Upper Control Arm with 5" steel cross shaft, 3-3/4" adjusting sleeves and a 10° Chrylser screw in ball joint plate. Sleeves adjust from 7" to 9".

California Residents WARNING

Insert ID 0.375",Shoulder OD 0.500",Shoulder length 0.300" Part Length 0.730",Stack Length 1.50" Mis-Align.Angle 21Deg

California Residents WARNING