0 Items
Home  >  Tools
|◀ ◀ 37 - 48 of 204 ▶ ▶|
View:
FITS E36 BMW MODELS
Quickly and easily adjust rear toe on BMW 3-series (E36) models with this tool from SPC. Simply use your 1/2" drive socket wrench to drive change on the rear toe adjustment brackets on these BMW vehicles and save time on every alignment. Equivalent to BMW tool #88-9180.

California Residents WARNING
Item#:
87567
Country of Origin:
USA
Your Price:
67.95
Each Single
ADJUSTABLE HEIGHT STEEL PLATE
An adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal. CAUTION: Use only according to directions packaged with product.

California Residents WARNING
Item#:
77928
Country of Origin:
China
Your Price:
53.86
Each Single
TOE BUSHING ADAPTER
The OE rear toe link bushing on many Subarus and the Scion FR-S can be easily removed when using the 67647 Bushing Press Adapter. Our Eccentric Toe Bushings (part# 67660) can then be installed using the adapter and a 72509 Ball Joint Press, or equivalent.

California Residents WARNING
Item#:
67647
Country of Origin:
USA
Your Price:
47.66
Each Single
PRESSES 66050 BUSHINGS
These adapter sleeves are designed to be used with the 40920 Performance Ball Joint Press. It is designed specifically to remove the stock rear control arm bushings and to install our Offset Rear Camber Bushings, Part number 66050 used on the new Chrysler LX platform cars.

California Residents WARNING
Item#:
66025
Country of Origin:
USA
Your Price:
127.45
Pair (2)
UPPER ARM BUSHING SERVICE
Easily replace press-in type control arm bushings on many domestic and imported vehicles with this service kit. Mechanical power screw quickly and easily removes worn bushings and installs them without damaging the control arm. Set included C-Frame, screw assembly and all adapters to do the job quickly and correctly. Packaged in a durable plastic case. Set includes the following items: 4427 (3),4428,4429 4430,4431,4432,4433 and 4434. #4429 - 1/8" thick tube

California Residents WARNING
Item#:
40910
Country of Origin:
Taiwan, Province Of
Your Price:
282.44
Each Single
FOR 1-1/2" TO 3" OD BUSHINGS
Service a wide range of bushings with this versatile press set. Our 29 piece kit will allow you to efficiently remove and install bushings from 1 1/2" to 3" OD (36-80mm ). Save time by servicing the suspension bushings on the vehicle vs. removing components to use a shop press. The kit uses long ACME threaded screws and bearing nuts to make manual pressing a snap. Set includes: 4-ACME threaded spindles, 3 plate adapers and 22 sleeves in sizes from 34mm ID to 80mm ID.

California Residents WARNING
Item#:
40940
Country of Origin:
Taiwan, Province Of
Your Price:
1387.78
Each Single
3/8" DRIVE THIN WALLED
Thin walled spanner wrench designed specifically for installation and removal of O.E. and 23000 series screw in 4WD alignment sleeves.

California Residents WARNING
Item#:
4169
Country of Origin:
USA
Your Price:
44.39
Each Single
1/2" DRIVE 35MM OPENING
This unique camber and caster adjustment tool fits full size RWD Ford vehicles. Starting in the early 90's Ford RWD vehicles require rotating a separate cam for each angle adjustment. To adjust caster/camber use the 88325 wrench to rotate the cam. This wrench also holds the cam to prevent slipping when tightening the lock nut.

California Residents WARNING
Item#:
88325
Country of Origin:
USA
Your Price:
42.86
Each Single
REMOVES STUCK CAM BOLTS
Use this press tool to remove stuck OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommended when installing our 25430, 25435, 25440 and 25445 replacement Toyota cam. NOTE: in some cases the OE cam sleeves may be solidly corroded in place and even the Cam Extractor Press may not be able to break them free. Set includes the following parts: 4434 and 44339.

California Residents WARNING
Item#:
40915
Country of Origin:
Taiwan, Province Of
Your Price:
194.45
Each Single
INCL OFFSET & CENTER PUNCHES
A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the older GM vehicles and the newer Jeep JK's and an offset punch for GM's newer models. 74914-Replacement offset punch 74915-Replacement center punch

California Residents WARNING
Item#:
74910
Country of Origin:
China
Your Price:
102.45
Each Single
INCLUDES 4434 & 4433 TOOLS
C-Clamp with threaded forcing rod for the 40920 press set.

California Residents WARNING
Item#:
40929
Country of Origin:
Taiwan, Province Of
Your Price:
147.98
Each Single
REPLACEMENT PART
Replacement punch stud for 74910

California Residents WARNING
Item#:
74915
Country of Origin:
China
Your Price:
30.70
Each Single
|◀ ◀ 37 - 48 of 204 ▶ ▶|
View: