This silicone grease helps eliminate squeaking bushings. The easy open 2cc pouch provides just enough grease for the job and is available in MasterPaks of 10.

California Residents WARNING

Replace corroded or stripped alignment cam assemblies on the front or rear of the Pontiac Solstice and Saturn Sky with this pair of cam bolts. Use one kit per wheel to adjust and lock in your camber and caster adjustment. Pair of cam bolts adjust Camber and Caster on the front & Camber and Toe on the rear.

California Residents WARNING

Replace the factory non-adjustable rear lower control arm with this adjustable arm to dial in ±2.0° of rear camber change on many popular Subaru models. This remove and replace arm includes rubber bushings to match chassis design parameters and OE levels for noise, vibration, and harshness. SPC's control arm kit also includes a sensor bracket (if needed - not pictured).

California Residents WARNING

This set of 2 adjustable lower control arms will provide up to ±1.5° of additinal camber and toe adjustment for all 1993 - 07 Imprezas, STis and WRXs as well as Saab 9-2Xs. Especially designed for the performance enthusiast, these arms can be used on lowered or stock ride height vehicles.

California Residents WARNING

Restore lost toe adjustment on many popular Subaru models with this replacement bolt and bushing kit. Many times the factory bolt freezes inside the control arm bushing and has to be cut out. This kit includes a replacement factory style toe cam and bushing so you can get the job done and bring rear toe back into specification.

California Residents WARNING

Replace corroded or damaged OE toe cam bolts on the rear of the 2000 to 2009 Subaru Legacy, Outback and many more with this SPC cam. Get up to ±1.5° of toe change and then lock it in place with this simple R&R piece. One kit is required per side or two for the entire vehicle.

California Residents WARNING

Replace the worn bushing on the inboard side of the rear lower control arm on many Subaru models from the 2000's to present. Need the toe cam adjuster too? Check out SPC part number 67668 for many 2000 to 2009 models. Part replaces OE #'s 20254AE01A and 20254FG020.

California Residents WARNING

Replace your worn or bent rear control arm (OE# 4877021011) on the Scion tC. This arm features rubber bushings to match OE design and performance. Need positive camber change? Consider SPC offset arm #67485.

California Residents WARNING

Quickly restore lost adjustment due to frozen or broken adjusters with this rear toe adjustment cam from SPC. This cam is designed to fit a wide variety of latemodel Chrysler, Dodge, and Jeep vehicles and is sold per wheel. Order two kits to replace the toe adjusters on both sides of the vehicle. Bolt offset on cam is greater than OE, so more adjustment can be obtained than the OE provides by elongating the OE cam slot to take advantage of SPC increased offset.

California Residents WARNING

Adjust front camber and caster ±1.5° on the Audi B5/B6/B7 and C5 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushigns maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5° to 6° of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81351. For the right hand (RH) side, use part number #81352.

SPC Arms Feature:
Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight
OE style, maintenance free, booted ball joints
Large 18mm threaded adjuster links
Replacement pinch bolts included

Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354.

California Residents WARNING

Adjust front camber and caster ±1.5° on the Audi B5/B6/B7 and C5 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, and harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5° to 6° of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the left hand (LH) side. For the right hand (RH) side, use part number #81352. Want to be able to adjust both sides? Use part number #81353.

SPC Arms Feature
Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight
OE styel, maintenance free, booted ball joints
Large 18mm threaded adjuster links
Replacement pinch bolts included

Need to replace the ball joint boots on these arms? We have replacement kits available. Part No. 81354.

California Residents WARNING

Adjust front camber and caster ±1.5° on the Audi B5/B6/B7 and C5 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi's unique multi-link suspension creates a 'Virtual' SAI. The factory does not publish a specification for caster, but SPC recommends 5° to 6° of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81351. Want to be able to adjust both sides? Use part number #81353.

SPC Arms Feature:
Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight
OE style, maintenance free, booted ball joints
Large 18mm threaded adjuster links
Replacement pinch bolts included

Need to replace the ball joint boots on these arms? We have replacement kits availalble! Part No. 81354.

California Residents WARNING