Use this fixed change shim to adjust rear camber on the Honda Fit ±0.25°. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71791-71795. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Use this fixed change shim to adjust rear toe on the Honda Fit ±0.50°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Replace corroded or damaged OE toe cam bolts on the rear of may late model Porsche vehicles with this replacement cam kit from SPC. This cam kit is designed to replace the factory adjusters and provide the same amount of adjustment as the factory part it is replacing. SPC uses hex chromate free finish and offers a 700 hr salt spray test for the best corrosion protection available. One kit is used for each side of the vehicle.

California Residents WARNING

Use this fixed change shim to adjust rear camber on the Honda Fit ±1.0°. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71791-71795. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Bring toe and camber back to factory specification on the rear of the Honda Fit with these fixed change shims from SPC. This 18 piece kit includes two each of a series of toe shims that will adjust from -0.5° to +0.5° in 1/10° increments and camber shims that will adjust from ±.25 to ±1.0° in 1/4° increments. Combine up to two shims to dial in both toe and camber. Fix tire wear issues and make the car track straight down the road.

California Residents WARNING

Use this fixed change shim to adjust rear toe on hte Honda Fit ±0.40°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Use this fixed change shim to adjust rear toe on the Honda Fit ±0.30°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Use this fixed change shim to adjust rear toe on the Honda Fit ±0.20°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Use this fixed change shim to adjust rear toe on the Honda Fit ±0.10°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See lots of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

These rear arms are for Accords, Pilots and more. An O.E. ball joint is integrated into this arm. Perfect for stock height and lowered vehicles.

California Residents WARNING

Use this arm to affect setback, camber, and track width. This arm ties into the knuckle directly below the 67290. Adjusting this in unison with the upper link will take bind out of the system.

California Residents WARNING

Use this arm to affect setback and toe. These links have bonded rubber bushings to maintain factory levels of noise vibration and harshness (NVH).

California Residents WARNING