Use this fixed change shim to adjust rear toe on the Fiat 500 -.38°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s? Consider shim kit 71770, it has two each of all Fiat 500 shims to make sure you have the right shim for the job. Note: You will need inverted (female) torx socket E20 to remove the hub.

California Residents WARNING

Use this fixed change shim to adjust rear toe on the Fiat 500 -.25°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s? Consider shim kit 71770, it has two each of all Fiat 500 shims to make sure you have hte right shim for the job. Note: You will need inverted (female) torx socket E20 to remove the hub.

California Residents WARNING

Use this fixed change shim to adjust rear toe on the Fiat 500 +.25°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s? Consider shim kit 71770, it has two each of all Fiat 500 shims to make sure you have the right shim for the job. Note: You will need inverted (female) torx socket E20 to remove the hub.

California Residents WARNING

Use this fixed change shim to adjust rear toe on the Fiat 500 +.13°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s? Consider shim kit 71770, it has two each of all Fiat 500 shims to make sure you have the right shim for the job. Note: You will need inverted (female) torx socket E20 to remove the hub.

California Residents WARNING

Bring toe and camber back to factory specification on the rear of the Fiat 500 wit these fixed cahnge shims from SPC. The 24 piece set includes two each of the toe shims that will adjust from -.5° to +.5° in 1/8° increments and camber shims that will adjust from .25° to ±1.0° in 1/4° increments. Combine up to two shims to dial in both toe and camber. Shims are also available individually. Fix tire wear issues and return proper handling. Note: You will need inverted (female) torx socket E20 to remove the hub.

California Residents WARNING

Designed to adjust camber on the new Saturn "L" series cars, this arm is easy to install and provides rear camber adjustment for the life of the vehicle. With its 8 degree adjustment range this arm can handle extreme amounts of camber changes that may be needed if you lower the Saturn "L".

California Residents WARNING

These great looking kits adjust toe with a polished aluminum red finish.

California Residents WARNING

This full contact rear shim adds positive 1.0° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment.

NOTE: Only use one shim per wheel. Stacking shims may cause issues with the ABS system.

California Residents WARNING

This full contact rear shim adds positive 0.75° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake Caliper shim included for correct hub to caliper alignment.

Note: Only use one shim per wheel. Stacking shims may cause issues with the ABS system.

California Residents WARNING

This full contact rear shim adds positive 0.5° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment.

NOTE: Only use one shim per wheel. Stacking shims may cause issues with the ABS system.

California Residents WARNING

Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to ±2° camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE Noise Vibration and Harshness (NVH) levels with booted ball joints and high durometer bonded rubber bushings. SPC offers the only greasable and rebuildable ball joint on the market. If you wear out your ball joint race with heavy track use, (it happens) you can get a rebuild kit and avoid the cost of a whole new arm. These arms come with preset turning torque, if you want a looser or tighter ball joint simply change preload by turning the retainer. This set can be used for front or rear, so if you want adjustability on all four corners get two sets.

California Residents WARNING

This full contact set of 6 rear shims adds positive 0.5°, 0.75°, or 1.0° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment.

NOTE: Only use one shim per wheel. Stacking shims may cause issues with the ABS system.

California Residents WARNING