These ball joints fit a variety of GM and Chrysler applications. If you are installaing our Adjustable Control Arms these ball joints are the perfect fit to finish your suspension upgrade or a direct fit to replace worn ball joint on a stock arm.

California Residents WARNING

Adjust rear camber on 1998 to 2004 Chrysler LH Bodies with this control arm. Simply replace the OE arm with the EZ Arm XR, and you can adjust the rear camber. NOTE: For positive camber changes larger than 1.0 degree install two EZ Arms on each side.

California Residents WARNING

Adjust rear camber on 2004 - 06 Sebring and Status sedans up to 7 degrees with this control arm. Simply replace the non-adjustable OE arm with the EZ Arm XR, and you can adjust rear camber.

California Residents WARNING

This fully adjustable trailing link provides +/-4 degrees camber change for the rear of the Chrysler 200, Dodge Avenger and Dodge Journey. The simple to install "remove and replace" kit provides a lifetime of adjustability to maximize tire life and dial in handling.

California Residents WARNING

Adjust camber or caster ±.3° using the factory offset in the lower control arm bushings of the popular Chrysler LX platform. Simply, replace the OE lower control arm bolts with these slotted bolts to achieve the change the factory provides. Need more adjustment? Replace the upper control arm with the 66040 or 66045. SPC uses a hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

California Residents WARNING

Replace the non-adjustable rear upper control arm with this adjustable arm to dial in ±2° of rear camber on Dodge Caliber, Jeep Compass and Patriot. This remove and replace arm includes an OE style xAxis balljoint and bonded rubber bushing to match chassis design parameters and OE ride quality.

California Residents WARNING

This adjustable sleeve replaces the knurled tie rod adjusting sleeve on 1998-04 Crysler LH bodies. Recommended when the existing sleeve has been damaged or if the tie rod end is being replaced so adjustments can be made easily.

California Residents WARNING

These ball joints fit a variety of GM and Chrysler applications. If you are installaing our Adjustable Control Arms these ball joints are the perfect fit to finish your suspension upgrade or a direct fit to replace worn ball joint on a stock arm.

California Residents WARNING

Lower Ball Joint. These work in our Hot Rod Mustang II Lower Cotnrol Arms. Equivalent to Moog #K772. To make removal easier use our #68880 Chrysler Ball Joint Socket.

California Residents WARNING

SPC Performance offers whole car Performance Kits for solving camber problems when lowering some of today's most popular vehicles. These kits allow you to tune front and rear suspension angles as well as correct some wheel clearance problems from sport (1.5") to extreme (up to 3") drops. This Performance Kit fits Honda Civic 96-00. Kit includes 2-Adjustable Front Upper Control Arms and 2-Rear Adjustable EZ Arms. Allows for up to 3" of drop. NOTE: When lowering vehicles more than 1.5" other suspension modifications may be necessary.

California Residents WARNING

For popular Honda Civics and Acura Integras. These arms are for vehicles that retain the stock ride height or have been lowered for performance. Simply replace the OE arm with the EZ Arm XR, and you adjust the rear camber from -2.0° to +5.0°. Note: Some vehicles may need longer bolts when installing this arm. Use set #73415.

California Residents WARNING

This rear bracket and bushing replaces the stock mount on'06 and up Honda Civics. By rotating the eccentric bolt/cam assembly in the bracket you can get +/-1.25 degrees of rear camber change. Use #75980 bushing removal press sleeve set with the #72509 ball joint press to remove the old bushing and to press in the new bushing.

California Residents WARNING