Get your 10th generation Civic ready for the track with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weights less than the OE arm it will replace. The arm is built with SPC's xAxis sealed flex joint to reduce compliance. Its unique adjustment design permits on-car adjustment of ±3.0° camber. Whether you need negative camber and reduced compliance for the track or want to get back to OE specifications this is the arm for you.

California Residents WARNING

This EZ Arm corrects rear camber on Honda's redesigned 2001 - 2005 Civic along with the 2002 - 07 Acura RSX. Simply replace the O.E. arm with this arm, perfect for stock height and lowered vehicles.

California Residents WARNING

Replace worn rear knuckle cross axis ball joints on the IRS Mustang Cobra with xAxis joints from SPC Performance. SPC's cross axis ball joints feature highly polished electroless nickel plated balls, corrosion and wear resistant moly impregnated nylon races, and dust boots to keep contaminants out & ensure long life. xAxis Joints come pre-greased and are designed to be maintenance free. This kit includes four (4) xAxis joints and press tool adapters to service a complete rear end. Use press tool #40940 or similar. Just need to replace one bushing? Order SPC part number 15645.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

Sometimes the front stabilizer may rub against the spring well housing. If this situation occurs, the stabilizer must be installed from the inside of the coil springs. Two sizes of short-nosed stabilizers are available: 24701 (a "short-nosed" 24700); 24751 (a "short nosed" 24750). Two stabilizer's are recommended per coil spring. (no more, no less). 4 per pack. Height ("A") = 1-1/2"

California Residents WARNING

Sometimes the front stabilizer may rub against the spring well housing. If this situation occurs, the stabilizer must be installed from the inside of the coil springs. Two sizes of short-nosed stabilizers are available: 24701 (a "short-nosed" 24700); 24751 (a "short nosed" 24750). Two stabilizer's are recommended per coil spring. (no more, no less). 4 per pack. Height ("A") = 1-1/4 - Short Nose

California Residents WARNING

Sometimes the front stabilizer may rub against the spring well housing. If this situation occurs, the stabilizer must be installed from the inside of the coil springs. Two sizes of short-nosed stabilizers are available: 24701 (a "short-nosed" 24700); 24751 (a "short nosed" 24750). Two stabilizer's are recommended per coil spring. (no more, no less). 4 per pack. Height ("A") = 7/8"

California Residents WARNING