These sleeves have a fixed postive camber and caster change and are designed specifically to align trucks that have been lifted or to provide more caster change than our standard 23220 series. For maximum drivability and to compensate for road crown, use a 23268 on the driver's side and a 23269 on the passenger's side.

California Residents WARNING

This Cam Bolt Kit is a replacement for the OE adjusters. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ±1.5 degrees camber and caster change. OE adjuster assemblies that are corroded may require SPC's press tool 40915 for removal, making the job quick and easy.

California Residents WARNING

These sleeves have a fixed postive camber and caster change and are designed specifically to align trucks that have been lifted or to provide more caster change than our standard 23220 series. For maximum drivability and to compensate for road crown, use a 23268 on the driver's side and a 23269 on the passenger's side.

California Residents WARNING

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 1 degree taper. Six shims per box.

California Residents WARNING

Inventory getting out of hand? Just need to fill in a few odd sizes? An adjustable Sleeve may be just what you need. These sleeves can adjust camber and/or caster in a large variety of combinations.

California Residents WARNING

These shims provide positive caster changes on early model downsize Jeeps by installing them between the lower control arm and the frame bracket. Stackable for larger changes. 6 Shims per package.

California Residents WARNING

These shims provide positive caster changes on early model downsize Jeeps by installing them between the lower control arm and the frame bracket. Stackable for larger changes. 6 Shims per package.

California Residents WARNING

These shims provide positive caster changes on early model downsize Jeeps by installing them between the lower control arm and the frame bracket. Stackable for larger changes. 6 Shims per package.

California Residents WARNING

These heavy duty cam bolts replace the upper control arm mounting bolts. This kit has the added convenience of slip-on cams which makes installation easier. Remove the O.E. bolts and replace them with these cams, rotating to provide camber and caster adjustment. Use 74910 punch to remove the O.E. slugs and elongate the holes. If necessary, 87400 includes 4 cam and bolt assemblies to cover both sides of the vehicle.

California Residents WARNING

Inventory getting out of hand? Just need to fill in a few odd sizes? An adjustable Sleeve may be just what you need. These sleeves can adjust camber in a large variety of combinations.

California Residents WARNING

These economical over-the-road heavy duty truck axle shims a re our lowest cost option. With average compression strength and hardness these shims are available in a large variety o f sizes and offer the technician a cost effective means to c orrect caster on over-the-road trucks and trailers. NOTE: Or dering one Part Number supplies Six Shims in a box. When pla cing order spring pad length and width are needed.

California Residents WARNING

Use these high strength steel allow shims (sold in a box of 6) to adjust caster and pinion angels 0.5° on your most rigorous applications. Designed for 4" wide leaf springs, this steel shim will adjust steer or drive axles on everything from cement and garbage trucks to OTR. Using "Z blocks" on your axle? Take a look at our axle spacers, PN 10798 to spread the load and tweak your ride height.

California Residents WARNING