Add permanent adjustability to the front end of the rear wheel drive Dodge Charger, Challenger, and Chrysler 300 vehicles with this cam bolt kit. The kit includes one camber cam and one caster cam to add adjustment to one side of the vehicle and gives ±1.0° camber adjustment and ±2.0 caster adjustment. The bolts offer the best corrosion protection available with a hex chromate free finish that is certified to meet 700 hr salt spray test requirements. SPC offers several alignment options for your LX platform vehicle. If you want more change and an easier install, consider the 66045 for change that can be driven from the upper control arm. You will need SPC's punch tool #74920 or a rotary file like #85130 to slot the factory bolt holes. Replace Mopar #68142226AB with this kit.

California Residents WARNING

Replace OE cams on the lower control arm of the 2002 to 2007 Jeep Liberty with this kit. Get the ± 1.5° camber/caster change that you need and lock it in with this simple R&R piece.

California Residents WARNING

This control arm makes it possible to adjust rear camber and toe on all production models of Dodge and Plymouth Neons, including the SRT 4.This arm may be used on vehicles that have been lowered for performance and appearance as well as vehicles that have retained their stock ride height.When two arms are used on each side you can change both camber and toe +/-3.0°.If you use just one arm on each side only +/- 1.5° toe change is available. Note: Each kit includes 2 arms.

California Residents WARNING

These offset pin joints replace the upper jin joints on late model Dodge Trucks. They come in 1/2 degree increments and provide for independent wheel caster and/or camber changes up to 1-1/2 degrees. Use installation sleeve set 23780 in conjunction with ball joint press 72509 for quick removal and installation of the pin joints. -------------NOTE: 23800 is an OEM Replacement Ball Joint with no change in camber or caster.

California Residents WARNING

These offset pin joints replace the upper jin joints on late model Dodge Trucks. They come in 1/2 degree increments and provide for independent wheel caster and/or camber changes up to 1-1/2 degrees. Use installation sleeve set 23780 in conjunction with ball joint press 72509 for quick removal and installation of the pin joints. -------------NOTE: 23800 is an OEM Replacement Ball Joint with no change in camber or caster.

California Residents WARNING

These offset pin joints replace the upper jin joints on late model Dodge Trucks. They come in 1/2 degree increments and provide for independent wheel caster and/or camber changes up to 1-1/2 degrees. Use installation sleeve set 23780 in conjunction with ball joint press 72509 for quick removal and installation of the pin joints. -------------NOTE: 23800 is an OEM Replacement Ball Joint with no change in camber or caster.

California Residents WARNING

These offset pin joints replace the upper jin joints on late model Dodge Trucks. They come in 1/2 degree increments and provide for independent wheel caster and/or camber changes up to 1-1/2 degrees. Use installation sleeve set 23780 in conjunction with ball joint press 72509 for quick removal and installation of the pin joints. -------------NOTE: 23800 is an OEM Replacement Ball Joint with no change in camber or caster.

California Residents WARNING

These HD 'King Pin' style joints replace the original sliding-ball design upper joints on late-model 4500 and 5500 Dodge trucks and rebadged Sterling Bullets. They provide independent adjustment up to 1.0 degree of camber or caster change (camber only on 4WD models due to outboard axle seals) to correct camber or cross-camber issues or to add caster on RWD models for improved tracking. * Note: 23850 is an OEM Replacement Ball Joint with no change in camber or caster.

California Residents WARNING

These HD 'King Pin' style joints replace the original sliding-ball design upper joints on late-model 4500 and 5500 Dodge trucks and rebadged Sterling Bullets. They provide independent adjustment up to 1.0 degree of camber change. * Note: 23850 is an OEM Replacement Ball Joint with no change in camber.

California Residents WARNING

These HD 'King Pin' style joints replace the original sliding-ball design upper joints on late-model 4500 and 5500 Dodge trucks and rebadged Sterling Bullets. They provide independent adjustment up to 1.0 degree of camber change. * Note: 23850 is an OEM Replacement Ball Joint with no change in camber.

California Residents WARNING

This Dodge Ram HD tie rod adjuster is hex-shaped to allow easy and precise toe adjustments without rounding and slipping on the factory adjuster. Part number 23610 fits Dodge Ram HD manufactured before 11/4/13 due to tie rod adjuster diameter. See applications for complete listing.

California Residents WARNING

This Dodge Ram HD* tie rod adjuster is hex-shaped to allow easy and precise toe adjustments without rounding and slipping on the factory adjuster. *Part number 23615 fits Dodge Ram HD manufactured afer 11/4/13 due to tie rod adjuster diameter. See applications for complete listing.

California Residents WARNING