Add an aggressive, ready to run stance to your F-body (1st Gen) with lower control arms from SPC. This pair of arms feature heavy duty 1.5" steel tubes with greasable delrin bushings giving you improved strength and handling. Updated geometry bolts in with no modification and gives 2° of additional caster for improved tracking with today's tires. These control arms also give 1" drop for a more aggressive stance. Further tune the ride height with our 1/4" spacer plates available separately: part number 94348 includes 2 plates and 94346 includes 4 plates. These plates can also be used as a mounting point for coil over suspensions. Complete your arm set with our OEM style bump stops, part number 95339. Want to fully dial in your suspension for ultimate handling? Check out our upper arms: part number 94305. We also have performance coil springs available with part number 94393.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for easy snap ring removal. For xAxis with a 2.0" OD. Refer to www.specprod.com/builderseries for sealed flex joints that will work with this end ring and suggested press adaptor.

California Residents WARNING

Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for easy snap ring removal. For xAxis with a 1.8125" OD. Refer to www.specprod.com/builderseries for sealed flex joints that will work with this end ring and suggested press adaptor.

California Residents WARNING

Use this weld in receiver to create your own control arm or chassis mount with an SPC xAxis sealed flex joint. This weld-in end ring is designed with optimal press fit for the xAxis and includes two snap rings for retention and an access window for easy snap ring removal. For xAxis with a 40mm OD. Refer to www.specprod.com/builderseries for sealed flex joints that will work with this end ring and suggested press adaptor.

California Residents WARNING

Welds into stock tubing sizes.Thread Size 5/8"-18 Outside Dia..870".Thread Length 1.3",Overall Length 1.938" Nominal Tube Size 1.000" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

Welds into stock tubing sizes.Thread Size 1/2"-20 Outside Dia..745".Thread Length 1.2",Overall Length 1.813" Nominal Tube Size .875" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

Welds into stock tubing sizes.Thread Size 1/2"-20 Outside Dia..745".Thread Length 1.2",Overall Length 1.813" Nominal Tube Size .875" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

Includes a flat midsize plate, adjsutable sleeves, OE style (minimal deflection) pivots.

California Residents WARNING

Welds into stock tubing sizes.Thread Size 3/4"-16 Outside Dia.1.120".Thread Length 1.4",Overall Length 2.125" Nominal Tube Size 1.250" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

Welds into stock tubing sizes.Thread Size 5/8"-18 Outside Dia..870".Thread Length 1.3",Overall Length 1.938" Nominal Tube Size 1.000" OD , Recommended Tube Wall Thickness 0.065" May be Turned Down To Fit Other Tubing Sizes

California Residents WARNING