Fix your rear toe on Hyundai Accent and Kia Rio models with this shim set from SPC. Fix tire wear, thrust angle, and poor drivability by getting the rear toe back into specification. This kit includes 2 each of the 0.13°, 0.25°, 0.38°, and 0.50° shims for maximum coverage and can be used for either positive or negative change.

California Residents WARNING

Direct positive camber change in .50° increment is made quickly and accurately with this shim. Combine this camber shim with a toe shim (71051-71055)to get the exact camber and toe change that is required. Stack up to two shims.

California Residents WARNING

Direct positive camber change in .25° increment is made quickly and accurately with this shim. Combine this camber shim with a toe shim (71051-71055)to get the exact camber and toe change that is required. Stack up to two shims.

California Residents WARNING

Direct negative camber change in -.50° increment is made quickly and accurately with this shim. Combine this camber shim with a toe shim (71051-71055)to get the exact camber and toe change that is required. Stack up to two shims.

California Residents WARNING

Direct negative camber change in -.25° increment is made quickly and accurately with this shim. Combine this camber shim with a toe shim (71051-71055)to get the exact camber and toe change that is required. Stack up to two shims.

California Residents WARNING

Adjust front camber ±1.25° on the Hyundai Genesis Sedan, Equus, and Kia K900 vehicles with this aluminum full contact shim from SPC. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will get the job done. SPC has built this shim and caliper spacer from aluminum to accomodate the rigors of the application and how you may choose to drive your car. Need more change? Use SPC p/n 71932 for ±0.50°, 71933 for ±.75° change, or 71934 for ±1.0° change. Get an 8 piece set and have 2 each of the different sizes available for your next job.

California Residents WARNING

These high strength forged rear arms are perfect for tuners or installers that need extended camber ranges on these popular platforms. Complete with O.E. stype bushings installed for a factory type ride.

California Residents WARNING

Keep this set of 8 front camber shims on hand so you are ready for the Hyundai Genesis, Equus, or Kia K900 that comes into the shop. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will get the job done. SPC has built these shims and caliper spacers from aluminum to accomodate the rigors of the application and how you may choose to drive your car. Shims are also available individually if you know the change you need.

California Residents WARNING

Adjust front camber ±1.0° on the Hyundai Genesis Sedan, Equus, and Kia K900 vehicles with this aluminum full contact shim from SPC. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will get the job done. SPC has built this shim and caliper spacer from aluminum to accomodate the rigors of the application and how you may choose to drive your car. Need more change? Use SPC p/n 71932 for ±0.50° change, 71933 for ±.75° change, or 71935 for ±1.25° change. Get an 8 piece set and have 2 each of the different sizes available for your next job.

California Residents WARNING

Adjust front camber ±.75° on the Hyundai Genesis Sedan, Equus, and Kia K900 vehicles with this aluminum full contact shim from SPC. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will get the job done. SPC has built this shim and caliper spacer from aluminum to accomodate the rigors of the application and how you may choose to drive your car. Need more change? Use SPC p/n 71932 for ±0.50° change, 71934 for ±1.00° change, or 71935 for ±1.25° change. Get an 8 piece set and have 2 each of the different sizes available for your next job.

California Residents WARNING

Adjust front camber ±.50° on the Hyundai Genesis Sedan, Equus, and Kia K900 vehicles with this aluminum full contact shim from SPC. Whether you want negative camber for the track or positive change to reduce tire wear, these easy to install shims will get the job done. SPC has built this shim and caliper spacer from aluminum to accomodate the rigors of the application and how you may choose to drive your car. Need more change? Use SPC p/n 71933 for ±0.75° change, 71934 for ±1.00° change, or 71935 for ±1.25° change. Get an 8 piece set and have 2 each of the different sizes available for your next job.

California Residents WARNING

Replace your worn out upper ball joints on the rear suspension on many Ford, Lincoln, and Mercury AWD vehicles with these replacement ball joints from SPC. Ford makes you buy the whole knuckle to replace this joint, but you can save time and money by simply replacing the ball joint instead. Need camber adjustment as well? Check out SPC p/n 67690 for a camber adjustment ball joint that offers ±1.25° of change.

California Residents WARNING