These great looking kits adjust toe with a polished aluminum red finish.

California Residents WARNING

This full contact rear shim adds positive 1.0° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment.

NOTE: Only use one shim per wheel. Stacking shims may cause issues with the ABS system.

California Residents WARNING

This full contact rear shim adds positive 0.75° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake Caliper shim included for correct hub to caliper alignment.

Note: Only use one shim per wheel. Stacking shims may cause issues with the ABS system.

California Residents WARNING

This full contact rear shim adds positive 0.5° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment.

NOTE: Only use one shim per wheel. Stacking shims may cause issues with the ABS system.

California Residents WARNING

Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to ±2° camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE Noise Vibration and Harshness (NVH) levels with booted ball joints and high durometer bonded rubber bushings. SPC offers the only greasable and rebuildable ball joint on the market. If you wear out your ball joint race with heavy track use, (it happens) you can get a rebuild kit and avoid the cost of a whole new arm. These arms come with preset turning torque, if you want a looser or tighter ball joint simply change preload by turning the retainer. This set can be used for front or rear, so if you want adjustability on all four corners get two sets.

California Residents WARNING

This full contact set of 6 rear shims adds positive 0.5°, 0.75°, or 1.0° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper alignment.

NOTE: Only use one shim per wheel. Stacking shims may cause issues with the ABS system.

California Residents WARNING

Use this fixed change shim to adjust rear camber on the Honda Fit ±0.75°. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71791-71795. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Use this fixed change shim to adjust rear camber on the Honda Fit ±0.50°. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71791-71795. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Use this fixed change shim to adjust rear camber on the Honda Fit ±0.25°. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71791-71795. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Use this fixed change shim to adjust rear toe on the Honda Fit ±0.50°. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71796-71799. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING

Replace corroded or damaged OE toe cam bolts on the rear of may late model Porsche vehicles with this replacement cam kit from SPC. This cam kit is designed to replace the factory adjusters and provide the same amount of adjustment as the factory part it is replacing. SPC uses hex chromate free finish and offers a 700 hr salt spray test for the best corrosion protection available. One kit is used for each side of the vehicle.

California Residents WARNING

Use this fixed change shim to adjust rear camber on the Honda Fit ±1.0°. Need toe change too? Stack a toe shim with this camber shim. See toe shims 71791-71795. See a lot of Fits? Consider shim kit 71790, it has two each of every shim to make sure you have the right shim for the job.

California Residents WARNING