Use this adjustable control arm from SPC Performance to make the rear of your Infiniti Q50 or Q70 fully adjustable for camber. The remove and replace link will provide ±3° of camber to adjust for other suspension modifications, be ready for the track, or simply to replace the stock non-adjustable arm. This link features a high durometer bonded rubber bushing to maintain factory ride quality and all steel contruction for strength when you need it. Attention: toe and set-back will change as you adjust camber with this arm, you may run out of toe change on the factory cam and desire to correct for set-back. Consider toe link p/n 72255, Adjustable trailing link p/n 72250 or the three arm set p/n 72240.

California Residents WARNING

This is the perfect kit for lowered Zs or G35s and G37s Infinitis. Provides additional camber and comes with a larger offset toe cam to bring the toe angle back into range. Use the 85130 rotary file to elongate the toe slots.

California Residents WARNING

Use this three arm set(3) to make the rear of your Infiniti Q50 or Q70 fully adjustable for camber, toe and wheel setback. Whether you are modifying for stace, want adjustability for the track or simply need to replace an OE arm, this is the kit for you. The camber link provides ±3° camber, the toe link will give ±3° beyond the OE cam and the adjustable trailing link makes ±1" setback adjustment possible so you can maintain factory wheel base or get the tire exactly where you want it in the wheel well. These links all feature high durometer bonded rubber bushings to maintain factory ride quality and all steel contruction for strength when you need it. Attention: the sequence of arm adjustments made is extremely important when upgrading to this multi-link system.

California Residents WARNING

Use this adjustable control arm from SPC Performance to give the rear of your Infiniti Q50 or Q70 extended toe adjustability. The remove and replace link will provide an additional ±3° of toe beyond what the OE cam bolt offers. This will often be necessary to adjust for camber adjustments made with an adjustable upper link like p/n 72245. This link features a high durometer bonded rubber bushing to maintain factory ride quality and all steel construction for strength when you need it. Note: Consider adjustable camber arm p/n 72245, adjustable trailing link p/n 72250 or the three arm set p/n 72240 to make your suspension fully adjustable.

California Residents WARNING

Use this adjustable trailing link from SPC Performance to make the rear of your Infiniti Q50 or Q70 fully adjustable for set-back / wheel base. The remove and replace link will provide ±1" movement to adjust for other suspension modifications, be ready for the track, or simply to replace the stock non-adjustable arm. This link features a high durometer bonded rubber bushing to maintain factory ride quality and all steel construction for strength when you need it. Consider adjustable toe arm p/n 72255, adjustable camber arm p/n 72245 or the three arm set p/n 72240 to make your suspension fully adjustable.

California Residents WARNING

Replace worn rear lower control arm cross axis ball joints on the Jaguar S-Type with xAxis Sealed Flex Joints from SPC performance. SPC's xAxis joints feature highly polished electro-less nickel plated balls, moly impregnated nylon races, and dust boots to keep contaminants out & ensure long life. xAxis Joints come pre-greased and are designed to be maintenance free. This kit includes four (4) xAxis joints and two (2) press tool adapters to service a complete rear end.

California Residents WARNING

Dial in your up-travel stops on your coil over suspensions. These easy to use Jounce Bumper Spacers allow you to control up-travel by simply placing urethane spacers between your factory bump stop and the shock body. The closed wedge design allows you to install the spacers without removing the spring or disassembling your strut. Take them out as easily as you put them in if you want to increase up travel. Each of the 4 spacers will decrease your up-travel by 8mm at the strut.

California Residents WARNING

Use this adjustable rear upper control arm to replace the OE arm and get ±3° of camber on the Lexus IS250, IS350, GS350, and RC350 models. SPC's adjustable camber link is manufactured from high-grade aluminum, is easy to adjust on car, includes a mounting bracket for the ABS wire and has OE style bushings to maintain factory ride quality. Whether you want a cambered look, are heading to the track, or want to save the tread life on your tires, these arms are for you.

California Residents WARNING

This pair of Lexus upper control arms will give you +/- 1° caster and +/-2.0° camber change. Simply replace the OE front upper control arms and dial in your suspension angles with our patented sliding balljoint and caster plate. Whether you want to tune your suspension for the ultimate in handling performance, minimize tire wear or easily move back and forth between two settings, these are the arms to get the job done.

California Residents WARNING

SPC's tried and proven adjustable rear arms allow camber changes up to ±1.5° ( limited only by the toe cam's range ) With the correct camber dialed in you can set up the popular Lexus IS and GS for superior handling and extend tire life.

California Residents WARNING

Replacement t-bar bushing end for 67230 control arm.

California Residents WARNING

These rear arms provide an increased amount of camber change on these popular tuner cars. Two arms are required per side and are adjusted together to give the maximum amount of camber change without affecting wheel setback. Stiffer rubber bushing material is used for better handling in performance applications.

California Residents WARNING