These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

These adjustable bushings make rear camber change possible for many Mercedes vehicles. By replacing the outer bushing in the two rear upper control arms, you achieve up to ±1.25° of change. Stock bushings are easily removed using the Specialty Products #75990 bushing press adapters.

California Residents WARNING

These billet aluminum arms fit the 3-Series (E36/E46/E85) along with the new Z4, giving you -1.0 to +3.0 degrees of rear camber change. Great for these popular tuner vehicles, these machined parts are in a stand-out silver anodized finish with SPC "Red" nuts. Our standard EZ Arm (#67110) for BMWs is also available.

California Residents WARNING

New ultra strong cro-moly cross shafts are threaded to accept both our standard OE style pivots or premium Delrin pivots. Cross shafts are available in chassis mounting hole spacing ( measure center to center ) as follows: 5 1/2", 5 7/8"-6", 6", 6 1/2", 6 5/16", 6 11/16", 6 15/16", 7 3/4"

California Residents WARNING

These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. For changes greater that +1.5 degrees check out our Extended Range Ball Joints.

California Residents WARNING

These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. For changes greater that +1.5 degrees check out our Extended Range Ball Joints.

California Residents WARNING

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to fine-tune your ride height these plates can also be stacked to change height. Use one spacer per side to add 1/2" or add two spacers per side to gain about 1" in ride height.

California Residents WARNING

New ultra strong cro-moly cross shafts are threaded to accept both our standard OE style pivots or premium Delrin pivots. Cross shafts are available in chassis mounting hole spacing ( measure center to center ) as follows: 5 1/2", 5 7/8", 6", 6 1/2", 6 5/16", 6 11/16", 6 15/16", 7 3/4"

California Residents WARNING

Replace your OE rear camber or toe adjuster with this replacement cam bolt. OE cam bolts are frequently seized and can't be adjusted. Remove the corroded bolt assembly and replace it with SPC's cam bolt to restore the factory ±1.5° camber or toe change. This bolt kit features a plastic sleeve to eliminate future corrosion.

California Residents WARNING

This silicone grease helps eliminate squeaking bushings. The easy open 2cc pouch provides just enough grease for the job and is available in MasterPaks of 10.

California Residents WARNING

New ultra strong cro-moly cross shafts are threaded to accept both our standard OE style pivots or premium Delrin pivots. Cross shafts are available in chassis mounting hole spacing ( measure center to center ) as follows: 5 1/2", 5 7/8"-6", 6", 6 1/2", 6 5/16", 6 11/16", 6 15/16", 7 3/4"

California Residents WARNING

3/4° Nylon Rear Shim.

California Residents WARNING