This is the perfect kit for the lowered Z or G35. Provides additional camber and comes with a larger offset toe cam to bring the toe angle back into range. Use the 85130 rotary file set to elongate the toe slots.

California Residents WARNING

Dial in ±3° camber and ±2° of toe to maximize your suspension set-up on the 370Z and G37 with this set of race ready adjustable rear lower control arms (RLCA), camber lockout plates, and extended range toe cams from SPC. Specifically designed for track use, the arms include SPC's xAxis sealed flex joints that perform like monoballs, but with non-metal bushings. These arms combine xAxis with forged steel receivers and straight-arm construction to minimize compliance under load. Included lockout plates will replace the OE camber cams to give you that extra assurance that your camber is locked in.

California Residents WARNING

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over 1 degree

California Residents WARNING

Fix your rear toe and Hyundai Accent and Kia Rio models with this ±.38° shim from SPC. Fix tire wear, thrust angle, and poor drivability by getting the rear toe back into specification. Work on a lot of Accents and Rios? Consider stocking the 71070 set that includes 2 each of hte 0.13°, 0.25°, 0.38°, and 0.50° shims for maximum coverage and can be used for either positive or negative change.

California Residents WARNING

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

California Residents WARNING

3/8° Nylon Rear Shim.

California Residents WARNING

3/8° Nylon Rear Shim.

California Residents WARNING

With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.

California Residents WARNING

This easy to install full contact shim is perfect for European Models needing rear toe adjustment. SPC's fixed change shims will provide ±.13° to ±.50° of toe change.

California Residents WARNING

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding.75970 spacers may be required. DO NOT use spacers with AWD vehicles.

California Residents WARNING

.50° Rear Camber Shim

California Residents WARNING

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over 1 degree

California Residents WARNING